Steam Iron Anti-Scale Filter Cartridge – SP-RHC450-AS

Introduction

This is the anti-scale filter cartridge for some Russell Hobbs steam irons.

• Genuine Russell Hobbs iron anti-scale filter cartridge

To extend the life of the appliance and to avoid problems with lime scale, your steam station is fitted with an anti-scale cartridge.

The life of the anti-scale cartridge depends on the frequencyof use and the hardness of the water in your area. In a soft water area this should be about 100 uses.

Do not put any descaling products (including vinegar) into the water tank. This can damage the appliance.

To replace the cartridge:

• Switch off and unplug your steam station.
• Allow your steam generator to cool down for at least 1 hour until the soleplate is cold.
• Remove the water tank from the front of the unit.
• Pull the anti -scale cartridge vertically out of the water tank. Note that the cartridge may contain water when it is removed.
• Fit the new cartridge and push it down firmly into the water tank.
• Refill and refit the water tank.
• Plug in your steam generator.
• Once the appliance is ready, pull the steam trigger until the steam is being produced. This will prime the system.

Includes:

• 1x anti-scale filter cartridge